Rapid Polymeric Sealant

* These values may vary depending on environmental factors such as temperature, moisture, and type of substrates. ** This information relates to fully cured product.

• Fast curing
• Good applicability and toolability
• Fungis resistant connection
• Resistant to high-pressure cleaning
• Permanently elastic after curing
• Good weather and UV resistance
• Good adhesion on all surfaces (except PE, PP and PTFE).
• Excellent resistance to many chemicals
• Free of solvents and isocyanate
• Easy to tool, extrude (even at low temperatures) and finish in all weatherconditions.
• Can be painted with all water based paints and many other systems (to be tested)
• In compliance with FDA CFR 21 177.2600 (extracts in distilled water)

• Elastic bondig between surfaces (chemical welding in structural bonding applications where a tough and rigid bond is
• Food industry, consumer goods, logistics & distribution, Cleanroom & healthcare, ..

12 months in unopened packaging in a cool and dry storage place at temperatures between +5°C and +25°C.

Substrates…. ABS, metals, aluminium, plastics, suitable

for different porous and non porous substrates like

CleanRock®, FRP, sandwich panels, wood, MDF, chipboard, concrete, stone, metal, plastics, PU foam, polystyrene foam, mineral wool and other conventional materials in construc- tion.

Not suitable for PE, PP, PTFE (eg Teflon®), bituminous substrates, copper or coppercontaining materials such as bronze and brass. We recommend a preliminary adhesion test on any substrate.

Nature: rigid, clean, dry, free of dust and grease.

Application method: With manual- or pneumatic 600cc caulking gun.

Cleaning: Clean with Cleaner or Hygi Swipesimmediately after use

Finishing: With a soapy solution.

Repair: With the same material.

Take the usual labour hygiene into account. Use only in well-ventilated areas. Consult the packaging label for more information.

• RAPID POLYMERIC SEALANT may be overpainted with water based paints, however due to the large number of paints and varnishes available we strongly suggest a compatibility test before
• When painted with oxidative drying paints disturban- ces in the drying of the paint may occur (we recom- mend to do a compatibility test before application).
• Remove all traces of soap (tooling) because it will harm the adhesion of the paint onto the

• In compliance with FDA CFR 21 177.2600 (extracts in distilled water)

The content of this technical data sheet is the result of tests, monitoring and experience. It is general in nature and does not constitute any liability. It is the responsibility of the user to determine by his own tests whether the product is suitable for the application.